Products

Your present location:Home -> Products -> Drilling and Milling Machining Center -> Drilling and Milling Machining

  • Product Name: Drilling and Milling Machining
  • Product Model: MT52A/AL/D/DL
  • Spindle Speed: 12,000(15,000/20,000/24,000options)
  • Tool Changer Capacity: 14/21/14ea
  • Positioning Accuracy: 0.005(0.000197)mm/Full travel、0.003(0.000118)mm/Full travel
  • System: NC System
  • Weight: 3,500/3,600/3,500/3,600kg

MT52 drilling and milling machining center adopts 7:24(BT30) spindle tapper, suitable for drilling, tapping, milling, boring, reaming and other machining processes. For the demand on higher productivity, 20000rpm spindle is available. With innovative technology, no matter the basic type MT52A or King-size MT52AL has the advantages of high productivity, high accuracy and high cost performance to meet different requirements.

MT52D drilling and milling machining center, with spindle tapper 7:24(BT30), suitable for drilling, tapping, milling, boring and reaming etc. machining process. In case of demanding higher production efficiency, 24000rpm spindle is available. With new technical, no matter basic type MT52D or length type MT52DL, each has high efficiency, high accuracy and high cost performance to meet different requirements.

 

 

MT52 Series ATC System
14-tool capacity and tool to tool time: 0.8s , ensuring highly efficient change action, saving machining time.

 

High-accuracy Ballscrew, Linear Guideway and Coupling
X/Y/Z axes utilize high-accuracy ballscrew, high-rigidity and high-positioning-accuracy guiderail and SFCcoupling, ensuring better torsional rigidity, small inertia, and zero backlash to meet the requirement for high-
speed running, maximum accelerating speed of 2.0G, and maximum rapid speed of 60m/min.

High-speed Spindle Motor
Spindle motor offer the best solution to shortening acceleration time and widen speed range, ensuring the machine with high productivity, the maximum rotation speed of 20000rpm.

Cooling System
Big coolant tank and high-power cooling motor can supply enough cutting liquid during machining process,pull-out type coolant tank saves room, convenient to clean chips, and 4 filters effectively avoid chips into
cooling pump.



High Speed, High accuracy, High Rigidity and High Efficiency
Pre-reading several segments makes the program, formed by continuous
minute displacement, perform high-speed machining at the rate of 33.7-k
segment/min. (Maximum Type B of 8.4-k segment/min)

 

High-accuracy Control Function
Carry out the corrections at the connection corner of lines, improving the circle
action and conducting interpolation control according to the instructions. The
instruction produced by arc action decreases the inward errors to make the
morphological track control closer to the programmed value.

NANO Control- Increase in Operational Precision of Interpolation
Even if the instruction is for 1-micrometer machining program, it can also
proceed interpolation operation in nanometer, smaller space for higher operation
accuracy of program segment intersection.

Shorter Positioning Time
Conducting the maximum torque deceleration can perform spindle positioning in
the shortest time, further saving startup time.

Preventing Spindle Case from Fall Down Caused by Outage
The power supply unit instantaneously monitors the outage and pulls up the
spindle case to avoid crashing work-pieces.

Tapping Fallback Function
Because of the E-STOP or power-cut, themachining program suddenly pauses in tapping operation, but automatic tool retracting from workpieces can still be achieved after restart.

MT52D/DL/MT52A/AL
Item Unit MT52D MT52DL MT52A MT52AL
Worktable Table Size mm(inch) 600*380(23.57*14.93) 800*400(31.5*15.75) 600*380(23.57*14.93) 800*400(31.5*15.75)
Max. Bearing Weight kg 300
Machining Capacity X-axis Travel mm(inch) 520(20.43) 700(27.56) 520(20.43) 700(27.56)
Y-axis Travel mm(inch) 400(15.71)
Z-axis travel mm(inch) 300(11.78)
Distance from Spindle End to Table Surface mm(inch) 180-480(7.09-18.90) 130-430(5.12-16.93) 180-480(7.09-18.90) 130-430(5.12-16.93)
Spindle Max. Rotation Speed of Spindle rpm 12,000(15,000/20,000/24,000options)
Tapping Speed rpm 6,000
Tapper   7/24
Feeding Rate Cutting Feeding Speed mm/min 22,000
Rapid Speed (X/Y/Z)) m/min 56/56/56
ATC System Tool System   BT30
Pop-rivet Model   P30T-I
Tool Changer Capacity ea 14/21 14
Max. Tool Length mm(inch) 200(7.87)
Max. Tool Diameter mm(inch) 80(3.15)
Max. Tool Weight kg 3
T-T Time sec 0.8 1.1
(C-C) Time sec 1.4 1.7
Motor Spindle Motor kw 4.8/19
Machine Power v AC200±10%
Power Capacity kva 15
Height mm(inch) 2,600(102.36)
Floor Space mm(inch) 2,421*1,650(95.32*64.96) 2,421*2,100(95.32*82.68) 2,421*1,650(95.32*64.96) 2,421*2,100(95.32*82.68)
Weight kg 3,500 3,600 3,500 3,600
NC System NC System   Mistubishi M70V(Siemens)
Display   8.4"TFT LCD
Machine Accuracy Positioning Accuracy mm(inch) 0.005(0.000197)/Full travel
Repeat Positioning Accuracy mm(inch) 0.003(0.000118)/Full travel

disc type tailstock

 hydraulic unit

NC rotary worktable

NC 5th-axis rotary worktable

air conditioner for electrical cabinet

 smoke precipitator

safety door lock

manual tailstock

 

 

 

 

auto industry

medical industry

military industry

others

auto industry

IT industry

 auto industry

others

 

 

 

 

download attachments :

Product inquiry
 
Content:
* Entered characters:0 Word
Less than or equal500Character
Posted by:
 
Less than or equal to 20 characters (including A-Z, a-z ,0-9, Chinese characters, excluding special characters)
Gender:
  Mr. Ms.
Your e-mail:
*
Example: example@mail.com
Cellphone number:
 
By digital ,"+", in the bars "-" the composition, the maximum allowable 20 characters
Verification code: